What I got from a typo with the Cisco show command.

While working on another article dealing with telnet and SSH.  I ran across a command I never used or seen before.   Originally I wanted see the configuration for line console and typed out “show run line console 0” but instead, for some reason or another I hit the enter key after I typed “sho run line” and saw this.

ConfigBytes#sho run line
Building configuration…
Current configuration : 1034 bytes
1 : !
2 : version 12.4
3 : service timestamps debug datetime msec
4 : service timestamps log datetime msec

5 : no service password-encryption
6 : !
7 : hostname ConfigBytes
8 : !
9 : boot-start-marker
10 : boot-end-marker
11 : !
12 : logging buffered 4096 emergencies
13 : !
14 : no aaa new-model
15 : memory-size iomem 5
16 : ip cef
17 : !
18 : !
19 : !
20 : !
21 : no ip domain lookup

Continue reading

ASA 5505 board repair and recovery

Image

I received a faulty ASA 5505 from a customer the other day.  Customer has already been shipped a replacement and now I asked what should I do with this one, sitting on my desk. The problem with this device is that the power plug had become loose, periodically causing the ASA to reload and causing havoc on the customer’s network. It clearly had to be replaced

Normally I would send a refurbished non smart net covered Cisco item out for repair, if the cost was justified. ASA 5505 can be purchased from Bay for around 375 bucks used and 600 new; cost to repair this plus shipping would have been close to $200.  In this case it was better to simply replace it.    I decided to crack this box open and take a peek inside. I feel comfortable doing this because my previous career was an electronics bench tech.  Continue reading