My preliminary Cisco router setup

As a potential engineer one of the many basic skills you’ll need to master in your career is setting up a newly purchased router. Surprisingly I know a lot of Engineers that have worked in NOC’s (Network Operations Centers) for years, troubleshooting all sorts Cisco devices and various issues and never really having to configure anything. This is truly one of the down sizes of working in a large company; you tend to get pigeon-toed into doing on particular thing all the time.

Two skills are needed to know from memory.

• Basic setup a router or switch

• Basic password recovery for a router or switch

This article will be focus on the setup process. I’ ll be using the GNS3 emulator, configuring a Cisco 2691.

I chose the 2691 because of light memory footprint and the fact I can **ADD250X250**I find a current IOS 12.4 for it. I used this router mostly in all of my GNS3 labs, because of the FA and multiple WIC interfaces and you can also use the NM-16ESW for added switch functions. For this exercise I have the c2691-entservicesk9-mz.124-25c.bin unpacked and loaded.

Below is a copy of my basic config for each router I setup, I’ve also included an Objective router that you can use to configure on your own.  Practice this a few times until you feel comfortable with setting up a Cisco router.


Router>en
Router#
Router#clock set 13:50:00 15 Nov 2010
Router#sho clock
13:51:35.199 UTC Mon Nov 15 2010

Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname [HOSTNAME]
ConfigBytes(config)#logging monitor emergencies
ConfigBytes(config)#logging console informational
ConfigBytes(config)#user [NAME] privilege 15 secret [PASSWORD]  
ConfigBytes(config)#no ip domain-lookup
ConfigBytes(config)#exit
ConfigBytes#
ConfigBytes#config t   
Enter configuration commands, one per line.  End with CNTL/Z.
ConfigBytes(config)#ip domain-name configbytes.com
ConfigBytes(config)#crypto key generate rsa
The name for the keys will be: ConfigBytes.configbytes.com
Choose the size of the key modulus in the range of 360 to 2048 for your
General Purpose Keys. Choosing a key modulus greater than 512 may take a few minutes.


How many bits in the modulus [512]: 1024
% Generating 1024 bit RSA keys, keys will be non-exportable…[OK]

ConfigBytes(config)#
Nov 15 14:48:15.499: %SSH-5-ENABLED: SSH 1.99 has been enabled
ConfigBytes(config)#
ConfigBytes(config)#ip ssh time-out 120
ConfigBytes(config)#ip ssh authentication-retries 3
ConfigBytes(config)#end
ConfigBytes#
ConfigBytes(config)#line con 0
ConfigBytes(config-line)#exec-timeout 30
ConfigBytes(config-line)#logging synchronous
ConfigBytes(config-line)#exit
ConfigBytes(config)#
ConfigBytes(config)#line vty 0 4
ConfigBytes(config-line)#exec-timeout 15
ConfigBytes(config-line)#logging synchronous
ConfigBytes(config-line)#login local
ConfigBytes(config-line)# transport input ssh
ConfigBytes(config-line)#end
ConfigBytes#
ConfigBytes#config t
Enter configuration commands, one per line.  End with CNTL/Z.
ConfigBytes(config)#int fa0/0
ConfigBytes(config-if)#description Link to MS Loopback 1
ConfigBytes(config-if)#ip address 192.168.20.254 255.255.255.252
ConfigBytes(config-if)#speed 100  
ConfigBytes(config-if)#duplex full
ConfigBytes(config-if)#no shut   
ConfigBytes#

You can download the PDF for this lab here

rstaples@configbytes.com www.configbytes.com

3 thoughts on “My preliminary Cisco router setup

  1. Hi Ron Staples…
    Please give me “c2691-entservicesk9-mz.124-25c.bin.unpacked” IOS version..
    I searched it over the net… but I can’t get it….

Leave a Reply

Your email address will not be published. Required fields are marked *

*